Type M Aviation Oil

12 QUART CASE
Nondispersant, Multigrade Engine Oil For Aircraft Piston Engines

Phillips 66 Type M Aviation Oil is an ashless, nondispersant, multigrade engine oil recommended for use in aircraft piston engines where the operator prefers a mineral oil-based engine oil that does not contain dispersant additives. It provides easier starting and quicker oil circulation at low temperatures compared with single-grade mineral oils, while maintaining high film strength at high temperatures and under high loads for protection against wear and piston scuffing.

Type M Aviation Oil is available in one viscosity grade: SAE 20W-50. It typically is used as break-in oil for newly overhauled engines where all-mineral type oils are recommended. The multigrade formulation helps reduce cylinder glazing tendency during break-in. Break-in normally is accomplished in less than 25 hours of engine operation.

Applications
•Aircraft piston engines where the operator prefers a nondispersant engine oil
•“Break-in” oil for newly overhauled aircraft engines

Type M Aviation Oil meets the requirements of:
•SAE Standard J1966
•U.S. Military Specification MIL-L-6082 (obsolete) QPL approval number: N06L1-20W-50 (Type M)

Features & Benefits
•Easier starting and quicker oil circulation at low temperatures compared with single-grade oils
•High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures
•Reduces cylinder glazing tendency during break-in, compared with single-grade oils